Speed Control Motor or AC single phase speed control motor is a combination of FHP Induction motor with a taco generator for feedback & Electronic speed controller. Single phase supply is given to Electronic speed controller which controls the phase angle of power being supplied to the Speed Control Motor. The feedback is taken from the taco attached at the back of speed control motor to maintain the desired speed.
Suitable for continuous operation, the speed of the motor can be varied by rotating knob of electronic speed controller over a wide range of 90 ~ 1400 RPM for 50 HZ supply. The speed can be reduced further by attaching a gearbox.
The Torque of Speed Control Motor decreases as the speed is reduced.
Motor Body, Gear Box Body | Aluminium |
Disc | Aluminium |
Fan Cover | Sheet Metal |
Cooling Fan | Nylon |
Shaft, Output Shaft | Steel Alloy |
Base Plate | Steel Metal |
Pinion, Gear | Steel Alloy, Teeth Hardened |
Item | Specification |
---|---|
Insulation Resistance | 100 MΩ or more when 500 VDC is applied between the winding to winding and the motor body. |
High Voltage Test | 1.5 kVAC ( 2kVAC for three phase 415 VAC) at 50 Hz or 60 Hz between the winding to winding and the motor body for 1 minute. |
Temperature Rise | Measured up to 80°C or less using the resistance change method after rated operation under normal ambient temperature and humidity. |
Insulation Class | F Class (155°C) |
Operating Ambient Temperature | -10 ~ +40°C (non freezing) |
Operating Ambient Humidity | 85% or less (Non-condensing) |
Degree of Protection | Lead Wire Type: IP 20 Terminal Box Type: IP 54 |