40 Watt Induction Motor
Frame size : 90 mm
Continuous Rating, TE Aluminium Body.
Rotates in Clockwise or Counter Clockwise Direction.
Terminal Box or Open Lead Wires for Connection.

Specifications
Model | Supply Voltage | Frequency Hz |
Current A |
Starting Torque N.m |
Rated Torque N.m |
Rated Speed RPM |
Capacitor μF |
---|---|---|---|---|---|---|---|
5 IW 4 40 | Single Phase 110 Volt | 50 | 0.70 | 0.20 | 0.30 | 1350 | 7.5 |
5 IW 4 40 | Single Phase 110 Volt | 60 | 0.70 | 0.21 | 0.25 | 1500 | 4.0 |
5 IX 4 40 | Single Phase 230 Volt | 50 | 0.30 | 0.20 | 0.30 | 1350 | 1.85 |
5 IY 4 40 | Three Phase 230 Volt | 50 | 0.33 | 0.40 | 0.30 | 1350 | - |
5 IY 4 40 | Three Phase 230 Volt | 60 | 0.46 | 0.25 | 0.25 | 1500 | - |
5 IY 4 40 | Three Phase 415 Volt | 50 | 0.20 | 0.40 | 0.30 | 1350 | - |
Type Of Shaft, G for Gear Shaft, R for Round Shaft
Gear Motor Torque Table
The maximum permissible torque is 20 N.m
50Hz : Four Pole Motor
Unit : N.m
RPM | 500 | 416 | 300 | 400 | 200 | 166 | 120 | 100 | 83 | 60 | 50 | 41 | 30 | 25 | 20 | 16 | 15 | 12.5 | 10 | 8.3 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Gear Ratio | 3 | 3.6 | 5 | 6 | 7.5 | 9 | 12.5 | 15 | 18 | 25 | 30 | 36 | 50 | 60 | 75 | 90 | 100 | 120 | 150 | 180 |
Ouptput Torque | 0.72 | 0.87 | 1.2 | 1.4 | 1.8 | 2.2 | 2.7 | 3.2 | 3.9 | 4.9 | 5.8 | 7.0 | 8.8 | 10.6 | 13.3 | 15.9 | 17.7 | 20.0 | 20.0 | 20.0 |
60Hz : Four Pole Motor
Unit : N.m
RPM | 600 | 500 | 360 | 300 | 240 | 200 | 144 | 120 | 100 | 72 | 60 | 50 | 30 | 30 | 24 | 20 | 18 | 15 | 12 | 10 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Gear Ratio | 3 | 3.6 | 5 | 6 | 7.5 | 9 | 12.5 | 15 | 18 | 25 | 30 | 36 | 50 | 60 | 75 | 90 | 100 | 120 | 150 | 180 |
Ouptput Torque | 0.63 | 0.76 | 1.1 | 1.3 | 1.6 | 1.9 | 2.6 | 3.2 | 3.8 | 4.7 | 5.7 | 6.8 | 8.6 | 10.2 | 12.1 | 14.9 | 18.0 | 20.0 | 20.0 | 20.0 |
The Gear Boxes are sold Seperately.
A coloured background indicates gear shaft rotation in same direction
as motor shaft.
A white background indicates gear shaft rotation in opposite direction
to the motor shaft.
The speed of geared motor is calculated by dividing motor's synchronous
speed by gear ratio.
The actual speed of gear motor is less than the displayed value,
depending upon the load.
Characteristics, specifications and dimensions are subject to change
without notice.
Dimensions
Gearbox Motor with Terminal Box

Round Shaft Motor with Terminal Box

Gearbox Motor with Lead Wire

Key And Keyway

Weight: Motor 2.2 kg
Gearbox 1.5 kg
Wiring Diagram
Wiring Diagram for Single Phase Diagram
.png)
Short Black wires and connect as shown to rotate the motor in clockwise direction. To change the direction, flip CW to CCW.
.png)
Red wires are for running winding & Black wires are for starting winding. To change the direction, interchange Black wires or Red Wires.
Wiring diagram for Three Phase Motor

To change the direction, interchange any two wires between U, V and W. For 415 Volt 3 Ph supply, wires are connected as shown. Short White, Black & Blue wires and then insulate properly.

To change the direction, interchange any two wires between U, V and W. For 230 Volt 3 Ph supply, wires are connected as shown.
Change The direction of motor only after it stops rotating. If the attempt is made during rotation, motor may ignore the reversing command or change the direction after some time.