180 Watt Induction Motor
Frame size : 90 mm
Continuous Rating, TEFC Alluminium Body.
Rotates in Clockwise or Counter Clockwise Direction.
Terminal Box or Open Lead Wires for Connection.
Specifications
Model | Supply Voltage | Frequency Hz |
Current A |
Starting Torque N.m |
Rated Torque N.m |
Rated Speed RPM |
Capacitor μF |
---|---|---|---|---|---|---|---|
5 IW 2 180 | Single Phase 110 Volt | 60 | 3.0 | 0.50 | 0.57 | 3000 | 18 |
5 IX 2 180 | Single Phase 230 Volt | 50 | 1.20 | 0.60 | 0.69 | 2700 | 4 |
5 IY 4 180 | Three Phase 230 Volt | 60 | 1.20 | 1.23 | 1.11 | 1500 | - |
5 IY 4 180 | Three Phase 230 Volt | 50 | 1.50 | 1.50 | 1.40 | 1250 | - |
5 IY 4 180 | Three Phase 415 Volt | 50 | 0.75 | 1.50 | 1.40 | 1250 | - |
Type Of Shaft, G for Gear Shaft, R for Round Shaft
Gear Motor Torque Table
The maximum permissible torque is 20 N.m
50Hz :
Unit : N.m
RPM | 500 | 416 | 300 | 250 | 200 | 166 | 120 | 100 | 83 | 60 | 50 | 41 | 30 | 25 | 20 | 16 | 15 | 12.5 | 10 | 83 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Gear Ratio | 3 | 3.6 | 5 | 6 | 7.5 | 9 | 12.5 | 15 | 18 | 25 | 30 | 36 | 50 | 60 | 75 | 90 | 100 | 120 | 150 | 180 |
Ouptput Torque | 3.4 | 4.1 | 5.7 | 6.8 | 8.5 | 10.2 | 12.8 | 15.3 | 18.4 | 20.0 | 20.0 | 20.0 | 20.0 | 20.0 | 20.0 | 20.0 | 20.0 | 20.0 | 20.0 | 20.0 |
60Hz :
Unit : N.m
RPM | 600 | 500 | 360 | 300 | 240 | 200 | 144 | 120 | 100 | 72 | 60 | 50 | 30 | 30 | 24 | 20 | 18 | 15 | 12 | 10 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Gear Ratio | 3 | 3.6 | 5 | 6 | 7.5 | 9 | 12.5 | 15 | 18 | 25 | 30 | 36 | 50 | 60 | 75 | 90 | 100 | 120 | 150 | 180 |
Ouptput Torque | 2.8 | 3.4 | 4.8 | 5.6 | 7.2 | 8.6 | 10.6 | 12.8 | 15.4 | 19.4 | 20.0 | 20.0 | 20.0 | 20.0 | 20.0 | 20.0 | 20.0 | 20.0 | 20.0 | 20.0 |
The Gear Boxes are sold Seperately.
A coloured background indicates gear shaft rotation in same
direction as motor shaft.
A white background indicates gear shaft rotation in opposite
direction to the motor shaft.
The speed of geared motor is calculated by dividing motor's
synchronous speed by gear ratio.
The actual speed of gear motor is less than the displayed
value, depending upon the load.
Characteristics, specifications and dimensions are subject to
change without notice.
Dimensions
Gearbox Motor with Terminal Box
Round Shaft Motor with Terminal Box
Gearbox Motor with Lead Wires
Key And Keyway
Weight: Motor 3 kg
Gearbox 1.5 kg
Wiring Diagram
Wiring Diagram for Single Phase Diagram
Short Black wires and connect as shown to rotate the motor in clockwise direction. To change the direction, flip CW to CCW.
Red wires are for running winding & Black wires are for starting winding. To change the direction, interchange Black wires or Red Wires.
Wiring Diagram for Three Phase Motor
To change the direction, interchange any two wires between U, V & W. For 415 Volt supply, wires are connected as shown. Short White, Black & Blue wire and then insulate properly.
To change the direction, interchange any two wires between U, V and W. For 230 Volt 3 Ph supply, wires are connected as shown.
Change The direction of motor only after it stops rotating. If the attempt is made during rotation, motor may ignore the reversing command or change the direction after some time.