25 Watt Induction Motor
Frame size : 80 mm
Continuous Rating, TE Aluminium Body
Rotates in Clockwise or Counter Clockwise Direction
Terminal Box or Open Lead Wires for Connection
Specifications
Model | Supply Voltage | Frequency Hz |
Current A |
Starting Torque N.m |
Rated Torque N.m |
Rated Speed RPM |
Capacitor μF |
---|---|---|---|---|---|---|---|
4 IW 4 25 | Single Phase 110 Volt | 50 | 0.36 | 0.11 | 0.18 | 1200 | 5.0 |
4 IW 4 25 | Single Phase 110 Volt | 60 | 0.40 | 0.12 | 0.16 | 1450 | 2.5 |
4 IX 4 25 | Single Phase 230 Volt | 50 | 0.20 | 0.12 | 0.18 | 1200 | 1.5 |
4 IY 4 25 | Three Phase 230 Volt | 50 | 0.21 | 0.21 | 0.17 | 1350 | - |
4 IY 4 25 | Three Phase 230 Volt | 60 | 0.20 | 0.16 | 0.16 | 1450 | - |
4 IY 4 25 | Three Phase 415 Volt | 50 | 0.15 | 0.21 | 0.17 | 1350 | - |
Type Of Shaft, G for Gear Shaft, R for Round Shaft
Gear Motor Torque Table
The maximum permissible torque is 8 N.m
50Hz : Four Pole Motor
Unit : N.m
RPM | 500 | 416 | 300 | 250 | 200 | 166 | 120 | 100 | 83 | 60 | 50 | 41 | 30 | 25 | 20 | 16 | 15 | 12.5 | 10 | 8.3 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Gear Ratio | 3 | 3.6 | 5 | 6 | 7.5 | 9 | 12.5 | 15 | 18 | 25 | 30 | 36 | 50 | 60 | 75 | 12 | 100 | 120 | 150 | 180 |
Ouptput Torque | 0.43 | 0.52 | 0.72 | 0.87 | 1.1 | 1.3 | 1.8 | 2.2 | 2.6 | 3.3 | 3.9 | 4.7 | 5.8 | 7.0 | 8.0 | 8.0 | 8.0 | 8.0 | 8.0 | 8.0 |
60Hz : Four Pole Motor
Unit : N.m
RPM | 600 | 500 | 360 | 300 | 240 | 200 | 144 | 120 | 100 | 72 | 60 | 50 | 30 | 30 | 24 | 20 | 18 | 15 | 12 | 10 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Gear Ratio | 3 | 3.6 | 5 | 6 | 7.5 | 9 | 12.5 | 15 | 18 | 25 | 30 | 36 | 50 | 60 | 75 | 12 | 100 | 250 | 150 | 180 |
Ouptput Torque | 0.41 | 0.5 | 0.69 | 0.83 | 0.1 | 1.2 | 1.7 | 2.1 | 2.5 | 3.1 | 3.7 | 4.5 | 5.6 | 6.7 | 8.0 | 8.0 | 8.0 | 8.0 | 8.0 | 8.0 |
The Gear Boxes are sold Seperately.
A coloured background indicates gear shaft rotation in same direction as motor shaft.
A white background indicates gear shaft rotation in opposite direction to the motor shaft.
The speed of geared motor is calculated by dividing motor's synchronous speed by gear ratio.
The actual speed of gear motor is less than the displayed value, depending upon the load.
Characteristics, specifications and dimensions are subject to change without notice.
Dimensions
Gearbox Motor and Terminal Box
Round Shaft Motor with Terminal Box
Gearbox Motor with Lead Wires
Key And Keyway
Weight: Motor 1.4 kg
Gearbox 0.75 kg
Wiring Diagram
Wiring Diagram for Single Phase Motor
Short Black wires and connect as shown to rotate the motor in clockwise direction. To change the direction, flip CW to CCW.
Red wires are for running winding & Black wires are for starting winding. To change the direction, interchange Black wires or Red Wires.
Wiring Diagram for Three Phase Motor
Short Black wires and connect as shown to rotate the motor in clockwise direction. To change the direction, flip CW to CCW.
Red wires are for running winding & Black wires are for starting winding. To change the direction, interchange Black wires or Red Wires.
Change The direction of motor only after it stops rotating. If the attempt is made during rotation, motor may ignore the reversing command or change the direction after some time.