12 Watt Reversible Motor

Frame size : 65 mm

30 Minute Rating, TE Aluminium Body. Quick Reversal of Direction of Rotation. Continuously Acting Internal Brake. Capacitor Cover or Open Lead Wires for Connection.

Specifications

Model Supply Voltage Frequency
Hz
Current
A
Starting Torque
N.m
Rated Torque
N.m
Rated Speed
RPM
Capacitor
μ m
3 RW 2 12 Single Phase 110V 50 0.30 0.03 0.04 2400 3.0
3 RX 212 Single Phase 230V 50 0.15 0.03 0.04 2400 1.0
3 RW 4 12 Single Phase 110V 50 0.33 0.027 0.09 1200 3.0
3 RX 412 Single Phase 230V 50 0.18 0.027 0.09 1200 1.35
3 RY 4 12 Three Phase 230V 50 0.12 0.03 0.08 1350 -
3 RY 412 Three Phase 415V 50 0.10 0.03 0.08 1350 -

Type Of Shaft, G for Gear Shaft, R for Round Shaft

Gear Motor Torque Table

The maximum permissible torque is 4 N.m

50Hz : Two Pole Motor

Unit : N.m

RPM 1000 830 600 500 400 330 240 200 166 120 100 82 60 50 40 32 30 25 20 16
Gear Ratio 3 3.6 5 6 7.5 9 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180
Output Torque 0.1 0.12 0.18 0.21 0.27 0.32 0.45 0.54 0.65 0.8 0.96 1.1 1.3 1.5 1.9 2.3 2.6 3.1 3.9 4.0

50Hz : Four Pole Motor

Unit : N.m

RPM 500 416 300 250 200 166 120 100 82 60 50 40 30 25 20 16 15 12.5 10 8.3
Gear Ratio 3 3.6 5 6 7.5 9 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180
Output Torque 0.21 0.26 0.36 0.43 0.54 0.65 0.91 1.1 1.3 1.6 2.0 2.4 2.9 3.5 4.0 4.0 4.0 4.0 4.0 4.0

The Gear Boxes are sold Seperately.
A coloured background indicates gear shaft rotation in same direction as motor shaft.
A white background indicates gear shaft rotation in opposite direction to the motor shaft.
The speed of geared motor is calculated by dividing motor's synchronous speed by gear ratio.
The actual speed is less than the displayed value, depending upon the load.
Characteristics, specifications and dimensions are subject to change without notice.

Dimensions

Motor, Gearbox with Capacitor Cover

Motor, Round Shaft with Capacitor Cover

Motor, Gearbox with Lead Wires

Key And Keyway

Weight : Motor 1.0 kg

Gearbox 0/5 kg

Wiring Diagram

Capacitor Cover Type

Capacitor is connected internally and is fitted in capacitor cover. Make a connection as shown to rotate the motor in clockwise direction. To change the direction flip CW to CCW.

Make the Connection as shown to rotate the motor in clockwise direction. To change the direction, interchange any two wires between U, V and W.

Lead Wire Single Phase Motor

Short Black Wires and connect as shown to rotate the motor in clockwise direction. To change the direction, flip CW to CCW.

Red wires are for running winding & Black wires are for starting winding. To change the direction, interchange Black wires or Red wires.

Lead Wire Three Phase Motor

To change the direction, interchange any two wires between U, V & W. For 415 Volt supply, wires are connected as shown. Short White, Black & Blue wire and then insulate properly.

To change the direction, interchange any two wires between U, V and W. For 230 Volt 3 Ph supply, wires are connected as shown.

Change The direction of motor only after it stops rotating. If the attempt is made during rotation, motor may ignore the reversing command or change the direction after some time.